The project is divided into four key areas: 1. development of stationary pollution control strategies; 2. promote clean manufacturing; 3.establishment of non-odor environment; 4. low risk pre-phase management. The project summarized stationary sources air pollution control and prevention accomplishments in recent years, integrated different stages of progress effectiveness, draw up air pollution control plan progress to scheme strategies continuously, and also modified stationary sources control priorities and aspects to achieve the control goals. The project compiled EPA control directions for the future, helped plan to reduce VOCs emissions from stationary sources, VOCs investigations and guidance of printing trades, and recommendations for stationary sources pollution control in 2011 to 2016. Clean manufacturing, included 1.accuratly collecting air pollution control fee: reporting rate increased from 79% to 100%, and reporting rate through the internet increased from 35% to 100%； total traced back almost 20 million dollars of pollution control fee by going through 2,413 cases review and 1,837 on-site investigations; 2.strengthening VOCs fugitive management: performed reproduction and PID verifications on equipments located at petroleum facilities; assisted semiconductor sector to improve airtight gas collection; performed gas collection efficiency test at tape and PU facilities. Establishment of non-odor environment by targeting on public awareness, included 1. gas station nozzle qualification increased from 86% in 2007 to 92%, complain reporting rate decreased from 11% to 2.1%; 2.302 restaurants which were complained frequently by neighbors had the priority to be examined and assisted, and investigated gas collection performance of 152 restaurants. The action decreased restaurants of 2009 were complained frequently from 162 to 45; also established the joint management mechanism across bureaus of catering industries. Low risk pre-phase management, included 1. high risk sectoral control: examined and consulted dioxins and heavy metals declaration objects, had 16 categories of hazards emissions restrained in stationary source system at the present stage in control, assisted electric industries to strengthen standards and emission reduction negotiations; reviewed and discussed the manufacturing process with Nan Ya Corporation to control 60~80% of Sox and NOx emissions effectively. 2. potential pollution investigation: performed investigations at 1,510 facilities with 115 facilities found with pollutions. Extended inventory and added additional 50 facilities into database.

Control of Stationary Sources、Policy Planning