環保專案成果報告查詢系統

專案計畫編號	EPA-103-HA14-03-A068
經費年度	103
計畫經費	5,800 千元
專案開始日期	2014/02/20
專案結束日期	2015/12/31
專案主持人	黃文輝
主辦單位	回收基管會
承辦人	陳凱婷
執行單位	財團法人工業技術研究院
專案分類	廢棄物管理
中文關鍵字	碳足跡排放係數、公告應回收廢棄物、再生料
英文關鍵字	carbon footprint, regulated recyclable waste, recovered materials
協同主持人	朱志弘
共同主持人
計畫聯絡人	朱志弘
計畫聯絡電話	03-5912565#
計畫聯絡信箱	vespachu@itri.org.tw

中文摘要	在消費者要求產品要越來越環保的趨勢下，建構產品與服務碳足跡計算之基礎能力，已逐漸成為政府及產業界達成減碳目標、碳資訊揭露、對外宣示其企業社會責任及產品綠色行銷之重要溝通工具。本計畫係為因應國內產品計算其碳足跡時所需要的碳足跡係數的不足。由於基管會所補貼回收處理廠處理公告應回收廢棄物產生的再生料也需計算碳足跡，是作為後續成為資源再生材料的碳足跡數值的必要資料。計畫為期兩年，第一年度主要為建立基礎，包括統一了基管會主管業務之13類33項公告應回收廢棄物之再生料碳足跡計算範疇、釐清了各類公告應回收廢棄物應計算碳足跡之45項再生料項目及名稱、建立廢電子電器及廢資訊物品通用之作業流程給回收處理業界參考、制定廢電子電器及廢資訊物品處理後所產生再生料計算規則、完成A廠的15類再生料碳足跡並了解計算碳足跡之可能障礙，以及依進程舉辦3場碳足跡基礎概念、標準做法及數據品質評估之教學，以加強相關單位對執行碳足跡所需的認知，並為基管會辦理一場碳足跡係數送件至管考處之說明會等。第二年度主要工作是承繼並擴大第一年度的工作內容，建立廢電子電器及廢資訊物品回收處理業碳足跡盤查與計算之標準作業程序、評估並提出回收處理業者定期申報再生料碳足跡的模式、完成另5家廢電子電器及廢資訊物品處理廠所產生的各種再生料碳足跡，以及提出處理廠減碳的重點及減碳措施之建議。六家處理廠15項再生料碳足跡經加權平均後(單位為kgCO2e/kg)數值分別如下：廢鐵(0.125)、廢銅(0.107)、廢鋁(0.148)、廢塑膠(0.132)、廢玻璃(0.120)、錐管玻璃(0.098)、冷媒(R11)-活性碳冰水機法(6.385)、冷媒(R11) -液態氮法(16.039)、冷媒(R12)(0.901)、冷媒(R22)(0.484)、潤滑油(0.096)、待再處理二次料(0.117)、廢鐵(延伸製程)(0.152)、廢銅(延伸製程)(0.144)、廢鋁(延伸製程)(0.150)。其中廢鐵、廢銅、廢鋁、廢塑膠等再生料碳足跡，經與日本福岡地區相同回收處理後的再生料碳足跡(0.12 kgCO2e/kg)比較相當接近。上述15項碳足跡經數據品質評分後，呈送環保署完成審議，也已經公布於碳足跡計算服務平台上提供給國內業者參考使用。此外已辦理三場次實務的整理與計算課程，符合計畫執行內容及進度要求。
中文關鍵字	碳足跡排放係數、公告應回收廢棄物、再生料

中文摘要

在消費者要求產品要越來越環保的趨勢下，建構產品與服務碳足跡計算之基礎能力，已逐漸成為政府及產業界達成減碳目標、碳資訊揭露、對外宣示其企業社會責任及產品綠色行銷之重要溝通工具。本計畫係為因應國內產品計算其碳足跡時所需要的碳足跡係數的不足。由於基管會所補貼回收處理廠處理公告應回收廢棄物產生的再生料也需計算碳足跡，是作為後續成為資源再生材料的碳足跡數值的必要資料。計畫為期兩年，第一年度主要為建立基礎，包括統一了基管會主管業務之13類33項公告應回收廢棄物之再生料碳足跡計算範疇、釐清了各類公告應回收廢棄物應計算碳足跡之45項再生料項目及名稱、建立廢電子電器及廢資訊物品通用之作業流程給回收處理業界參考、制定廢電子電器及廢資訊物品處理後所產生再生料計算規則、完成A廠的15類再生料碳足跡並了解計算碳足跡之可能障礙，以及依進程舉辦3場碳足跡基礎概念、標準做法及數據品質評估之教學，以加強相關單位對執行碳足跡所需的認知，並為基管會辦理一場碳足跡係數送件至管考處之說明會等。第二年度主要工作是承繼並擴大第一年度的工作內容，建立廢電子電器及廢資訊物品回收處理業碳足跡盤查與計算之標準作業程序、評估並提出回收處理業者定期申報再生料碳足跡的模式、完成另5家廢電子電器及廢資訊物品處理廠所產生的各種再生料碳足跡，以及提出處理廠減碳的重點及減碳措施之建議。六家處理廠15項再生料碳足跡經加權平均後(單位為kgCO2e/kg)數值分別如下：廢鐵(0.125)、廢銅(0.107)、廢鋁(0.148)、廢塑膠(0.132)、廢玻璃(0.120)、錐管玻璃(0.098)、冷媒(R11)-活性碳冰水機法(6.385)、冷媒(R11) -液態氮法(16.039)、冷媒(R12)(0.901)、冷媒(R22)(0.484)、潤滑油(0.096)、待再處理二次料(0.117)、廢鐵(延伸製程)(0.152)、廢銅(延伸製程)(0.144)、廢鋁(延伸製程)(0.150)。其中廢鐵、廢銅、廢鋁、廢塑膠等再生料碳足跡，經與日本福岡地區相同回收處理後的再生料碳足跡(0.12 kgCO2e/kg)比較相當接近。上述15項碳足跡經數據品質評分後，呈送環保署完成審議，也已經公布於碳足跡計算服務平台上提供給國內業者參考使用。此外已辦理三場次實務的整理與計算課程，符合計畫執行內容及進度要求。

中文關鍵字

碳足跡排放係數、公告應回收廢棄物、再生料

類型	檔名	檔案大小	說明	最新版公開日期
期末報告	公告應回收廢棄物回收處理體系碳排放係數建置計畫(期末報告)_1050127定稿.pdf	17MB		2016/4/1 上午 12:00:00

摘要	For more and more people asked for environmental friendly products, that’s why building the capability of calculating carbon footprint of products is the main goal of government and enterprises, especially the benefit from communicating the social responsibility of carbon reduction information of products to consumers. This plan was to cope with the shortage of carbon footprint (CFP) of material that enterprises in Taiwan needed to calculate CFP of their products. The Recycling plants subsidized by Environmental Protection Administration Recycling Fund Management Board, produced recycled material. The Recycling plants should provide the CFP of the recycled material. It’s the required information for calculating the CFP of Regenerated industrial materials. This was a two-year plan. The purpose in the first year was to build the foundation: Unified the calculating scope of 13 kinds(33 items) regulated recyclable waste; identified 45 different recycled material and their names; built the CFP calculation processes of waste electronic, electric appliances and IT equipment; established the product category rule of recycled material of waste electronic, electric appliances and IT equipment; fulfilled 15 different CFPs of recycled material and gained the difficulty in the process of CFP inventory; handled 3 CFP training courses and 1 extra discussion for delivery CFP of product to EPA’s database. The second year’s work followed the first year’s content but diffusion to more recycling plant: established the standard operating procedures of inventory for waste electronic, electric appliances and IT equipment; fulfilled the CFP of recycled material of the other 5 plants and proposed the carbon reduction suggestion; calculated CFP of the 6 plants’ recycled material by weighting their proportion of its weight and got the weighted mean value; the mean value of the 15 CFP of recycled material qualified by EPA as the highest quality and announced on CFP calculating service platform; handled 3 CFP practical training courses. All the tasks were all fulfilled as planed and in line with the requirements. The value of the 15 CFP of recycled material are(unit: kgCO2e/kg) recycled iron scrap (0.125), recycled copper scrap (0.107), recycled aluminum scrap (0.148), recycled plastic scrap (0.132), recycled glass scrap (0.120), recycled funnel glass scrap(CRT) (0.098), recycled CFC-11(Activated carbon method) (6.385), recycled CFC-11(Liquid nitrogen method) (16.039), recycled CFC-12 (0.901), recycled HCFC-22 (0.484), recycled Lubricants (0.096), recycled Materials pending for further treatment (0.117), recycled iron scrap from gas compressor or motor (extended process)(0.152), recycled copper scrap from gas compressor or motor (extended process)(0.144), recycled aluminum scrap from gas compressor or motor (extended process)(0.150). Comparing to the CFP(0.12 kgCO2e/kg) of similar recycled material(iron scrap, copper scrap, aluminum scrap, plastic scrap) from Fukuoka(Japan) is very close.
英文關鍵字	carbon footprint, regulated recyclable waste, recovered materials

摘要

For more and more people asked for environmental friendly products, that’s why building the capability of calculating carbon footprint of products is the main goal of government and enterprises, especially the benefit from communicating the social responsibility of carbon reduction information of products to consumers. This plan was to cope with the shortage of carbon footprint (CFP) of material that enterprises in Taiwan needed to calculate CFP of their products. The Recycling plants subsidized by Environmental Protection Administration Recycling Fund Management Board, produced recycled material. The Recycling plants should provide the CFP of the recycled material. It’s the required information for calculating the CFP of Regenerated industrial materials. This was a two-year plan. The purpose in the first year was to build the foundation: Unified the calculating scope of 13 kinds(33 items) regulated recyclable waste; identified 45 different recycled material and their names; built the CFP calculation processes of waste electronic, electric appliances and IT equipment; established the product category rule of recycled material of waste electronic, electric appliances and IT equipment; fulfilled 15 different CFPs of recycled material and gained the difficulty in the process of CFP inventory; handled 3 CFP training courses and 1 extra discussion for delivery CFP of product to EPA’s database. The second year’s work followed the first year’s content but diffusion to more recycling plant: established the standard operating procedures of inventory for waste electronic, electric appliances and IT equipment; fulfilled the CFP of recycled material of the other 5 plants and proposed the carbon reduction suggestion; calculated CFP of the 6 plants’ recycled material by weighting their proportion of its weight and got the weighted mean value; the mean value of the 15 CFP of recycled material qualified by EPA as the highest quality and announced on CFP calculating service platform; handled 3 CFP practical training courses. All the tasks were all fulfilled as planed and in line with the requirements. The value of the 15 CFP of recycled material are(unit: kgCO2e/kg) recycled iron scrap (0.125), recycled copper scrap (0.107), recycled aluminum scrap (0.148), recycled plastic scrap (0.132), recycled glass scrap (0.120), recycled funnel glass scrap(CRT) (0.098), recycled CFC-11(Activated carbon method) (6.385), recycled CFC-11(Liquid nitrogen method) (16.039), recycled CFC-12 (0.901), recycled HCFC-22 (0.484), recycled Lubricants (0.096), recycled Materials pending for further treatment (0.117), recycled iron scrap from gas compressor or motor (extended process)(0.152), recycled copper scrap from gas compressor or motor (extended process)(0.144), recycled aluminum scrap from gas compressor or motor (extended process)(0.150). Comparing to the CFP(0.12 kgCO2e/kg) of similar recycled material(iron scrap, copper scrap, aluminum scrap, plastic scrap) from Fukuoka(Japan) is very close.

英文關鍵字

carbon footprint, regulated recyclable waste, recovered materials