環保專案成果報告查詢系統

專案計畫編號	EPA-106-H3-02-A243
經費年度	106
計畫經費	9,200 千元
預算科目	廢棄物管理-資源循環再利用
專案開始日期	2017/08/09
專案結束日期	2018/12/31
專案主持人	樊國恕
主辦單位	廢管處
承辦人	哈元圓
執行單位	財團法人環境資源研究發展基金會
專案分類	廢棄物管理
中文關鍵字	循環經濟、廢塑膠、塑膠包裝
英文關鍵字	Circular Economy, plastic waste, plastic packaging
協同主持人	馬鴻文；溫麗琪；周良輝
共同主持人
計畫聯絡人	譚鈺齡
計畫聯絡電話	02-25150369#168
計畫聯絡信箱	ab1354k7zz@ier.org.tw

中文摘要	本計畫執行期間自民國 106 年 8 月 9 日至民國 107 年 12 月 31 日止，四項計畫目標是評析檢討我國塑膠廢棄物資源循環相關機制，研擬配套對策與未來方針、盤點我國塑膠資源物質量及流向，研提資源循環相關管理制度及精進策略建議、參考歐盟及其他國家做法，建立我國塑膠資源循環經濟產業垂直管理體系、結合專家學者諮詢及論壇，推廣塑膠資源循環經濟理念，其成果摘要如下： 1. 蒐集、彙整歐盟、法國、美國、日本及韓國在塑膠資源物管理相關制度之推動內容及最新資訊，找出我國管理制度可參採內容，並檢視我國廢棄物管理及資源管理現況，針對我國塑膠資源管理，提出未來執行建議。 2. 參照國家層級物質流指標建置塑膠資源循環流布架構盤點數據，其中可發現我國塑膠資源以出口為主要流向，推估整體塑膠資源循環利用率約為 9.16%。依據國內外現況與資訊，本年度選定產品及原料類型多元化之包裝材以及型態較為單一之汽車產業作為優先推動塑膠循環經濟的主要類別，並研提相關管理制度及精進策略建議，以利塑膠資源物管理與國際接軌。 3. 彙整完成國際塑膠二次物料管理策略，並建構循環經濟共生式創新系統平台架構作為可行發展模式，平台架構完整闡述平台定義與執行程序，各執行步驟詳述各階段之目的、企業應遵行之流程、及對應之產出。本年度選定4 項物料（HDPE 容器、PP 汽車保險桿、廢漁網、塑膠包膜）將其套用至上述執行步驟中並依序建立各物料之系統診斷表、生態系統圖、價值鏈關係圖，作為實際執行循環經濟之參考。經由上述評估步驟，並參考荷蘭推動的 Green Deals 模式，已初步規劃塑膠包膜循環經濟聯盟架構，以期未來結合官方與業界力量，建立共同發展目標，包含製造端、使用端(包含使用塑膠膜包裝商品的產品製造商、物流運輸商、批發零售商)、回收處理端(回收處理業)，媒合合作機會，透過此平台進行互動與討論，協助各產業發展為綠色供應鏈，以完善整體循環再利用體系。 4. 配合本署及計畫相關工作，訪視10 家業者，並深入瞭解其處理技術資源化之流程，另針對塑膠循環路徑圖、試點規劃作業及再生塑膠粒用於食品容器等議題召開專家諮詢學者會議，以推廣塑膠資源循環經濟理念。
中文關鍵字	循環經濟、廢塑膠、塑膠包裝

中文摘要

本計畫執行期間自民國 106 年 8 月 9 日至民國 107 年 12 月 31 日止，四項計畫目標是評析檢討我國塑膠廢棄物資源循環相關機制，研擬配套對策與未來方針、盤點我國塑膠資源物質量及流向，研提資源循環相關管理制度及精進策略建議、參考歐盟及其他國家做法，建立我國塑膠資源循環經濟產業垂直管理體系、結合專家學者諮詢及論壇，推廣塑膠資源循環經濟理念，其成果摘要如下： 1. 蒐集、彙整歐盟、法國、美國、日本及韓國在塑膠資源物管理相關制度之推動內容及最新資訊，找出我國管理制度可參採內容，並檢視我國廢棄物管理及資源管理現況，針對我國塑膠資源管理，提出未來執行建議。 2. 參照國家層級物質流指標建置塑膠資源循環流布架構盤點數據，其中可發現我國塑膠資源以出口為主要流向，推估整體塑膠資源循環利用率約為 9.16%。依據國內外現況與資訊，本年度選定產品及原料類型多元化之包裝材以及型態較為單一之汽車產業作為優先推動塑膠循環經濟的主要類別，並研提相關管理制度及精進策略建議，以利塑膠資源物管理與國際接軌。 3. 彙整完成國際塑膠二次物料管理策略，並建構循環經濟共生式創新系統平台架構作為可行發展模式，平台架構完整闡述平台定義與執行程序，各執行步驟詳述各階段之目的、企業應遵行之流程、及對應之產出。本年度選定4 項物料（HDPE 容器、PP 汽車保險桿、廢漁網、塑膠包膜）將其套用至上述執行步驟中並依序建立各物料之系統診斷表、生態系統圖、價值鏈關係圖，作為實際執行循環經濟之參考。經由上述評估步驟，並參考荷蘭推動的 Green Deals 模式，已初步規劃塑膠包膜循環經濟聯盟架構，以期未來結合官方與業界力量，建立共同發展目標，包含製造端、使用端(包含使用塑膠膜包裝商品的產品製造商、物流運輸商、批發零售商)、回收處理端(回收處理業)，媒合合作機會，透過此平台進行互動與討論，協助各產業發展為綠色供應鏈，以完善整體循環再利用體系。 4. 配合本署及計畫相關工作，訪視10 家業者，並深入瞭解其處理技術資源化之流程，另針對塑膠循環路徑圖、試點規劃作業及再生塑膠粒用於食品容器等議題召開專家諮詢學者會議，以推廣塑膠資源循環經濟理念。

中文關鍵字

循環經濟、廢塑膠、塑膠包裝

類型	檔名	檔案大小	說明	最新版公開日期
期末報告	EPA-106-H3-02-A243.pdf	29MB	正式報告	2019/2/12 上午 12:00:00

摘要	The duration of this project went from August 8th 2017 to December 31st 2018. The four goals are：1.analysis and review relevant plastic resource recycling system, formulate supporting measures and future guidelines ； 2. check the quality(mass) and flow of our plastic resources, propose related resource recycling management systems and suggestions for advanced strategies; 3. refer to the practices of EU and other countries, establish industry vertical management system for Taiwan plastic resources circular economy;4. Combine consultation of expert and forum, promote the concept of plastic resources circular economy, the results summarized in the following: 1. To research and collect up‐to‐date literature related to plastic resource management from the EU, the USA, France, Japan and Korea, summarizing pros and cons as important reference for establishing plastic resource policy in Taiwan. The waste management policy and resource management status in Taiwan were reviewed in order to propose appropriate suggestions for coming up measures. 2. According to the framework of National Material Flow Indicators, it can be found that Taiwan plastic resources are mainly exported, and the overall recycling rate of plastic resources is estimated to be about 9.16%. Based on the current situation and information at home and abroad, we selected packaging materials and a single-type automotive industry as the main categories to promote plastic circular economy this year, and investigation relevant management systems and refined strategic recommendations for the benefit of plastic resource management which will be in line with international standards. 3. Referring to the trend and strategy of secondary materials management of various governments, the project proposes the target strategies of plastic secondary material management. The project also constructs a circular economy symbiosis innovation system platform as a feasible development model moving toward circular economy. The project proposed the definition of the platform and critical implementation procedures. Each implementation step details the purpose of each phase for the industry to follow, and each step can lead the corresponding output. In this year, four selected materials (HDPE containers, PP auto bumpers, waste fishing nets, plastic membrane packaging) are applied to the above-mentioned implementation steps with the outputs of the system diagnostic tables, ecosystem maps, and value-chain maps. According to the results, the plastic membrane packaging is the target material to be formed for the circular economy alliances. On the basis of the Green Deals model promoted by the Netherlands, the plastic membrane packaging is proposed for the pilot plan, and give the connection between government and industries to collaborate moving toward circular economy. This project makes efforts to build up the platform for the circular economy alliances to assist the development of various industries into a green supply chain, as well as to improve the overall recycling system. 4. Cooperating with the EPA and the relevant work of this project, we have visited 10 operators, and thoroughly understand their resources processing technology, and convening expert consultation meetings on roadmap of plastics circular economy, pilot planning operation and food container with recycled plastic pellets to promote the concept of plastic resources circular economy.
英文關鍵字	Circular Economy, plastic waste, plastic packaging

摘要

The duration of this project went from August 8th 2017 to December 31st 2018. The four goals are：1.analysis and review relevant plastic resource recycling system, formulate supporting measures and future guidelines ； 2. check the quality(mass) and flow of our plastic resources, propose related resource recycling management systems and suggestions for advanced strategies; 3. refer to the practices of EU and other countries, establish industry vertical management system for Taiwan plastic resources circular economy;4. Combine consultation of expert and forum, promote the concept of plastic resources circular economy, the results summarized in the following: 1. To research and collect up‐to‐date literature related to plastic resource management from the EU, the USA, France, Japan and Korea, summarizing pros and cons as important reference for establishing plastic resource policy in Taiwan. The waste management policy and resource management status in Taiwan were reviewed in order to propose appropriate suggestions for coming up measures. 2. According to the framework of National Material Flow Indicators, it can be found that Taiwan plastic resources are mainly exported, and the overall recycling rate of plastic resources is estimated to be about 9.16%. Based on the current situation and information at home and abroad, we selected packaging materials and a single-type automotive industry as the main categories to promote plastic circular economy this year, and investigation relevant management systems and refined strategic recommendations for the benefit of plastic resource management which will be in line with international standards. 3. Referring to the trend and strategy of secondary materials management of various governments, the project proposes the target strategies of plastic secondary material management. The project also constructs a circular economy symbiosis innovation system platform as a feasible development model moving toward circular economy. The project proposed the definition of the platform and critical implementation procedures. Each implementation step details the purpose of each phase for the industry to follow, and each step can lead the corresponding output. In this year, four selected materials (HDPE containers, PP auto bumpers, waste fishing nets, plastic membrane packaging) are applied to the above-mentioned implementation steps with the outputs of the system diagnostic tables, ecosystem maps, and value-chain maps. According to the results, the plastic membrane packaging is the target material to be formed for the circular economy alliances. On the basis of the Green Deals model promoted by the Netherlands, the plastic membrane packaging is proposed for the pilot plan, and give the connection between government and industries to collaborate moving toward circular economy. This project makes efforts to build up the platform for the circular economy alliances to assist the development of various industries into a green supply chain, as well as to improve the overall recycling system. 4. Cooperating with the EPA and the relevant work of this project, we have visited 10 operators, and thoroughly understand their resources processing technology, and convening expert consultation meetings on roadmap of plastics circular economy, pilot planning operation and food container with recycled plastic pellets to promote the concept of plastic resources circular economy.

英文關鍵字

Circular Economy, plastic waste, plastic packaging