EPA-107-FA12-03-A121

107

9,625 千元

固定污染源管制

2018/04/26

2019/12/31

莊惠如

空保處

何佳祥

環科工程顧問股份有限公司

大氣空氣

總量管制、既存固定污染源削減、排放量削減

Total quantity control, Emission reduction, reduction of pollutants from existing stationary pollution sources

莊惠如

02-27753919#382

sammy@estc.tw

我國空氣污染防制法針對未符合空氣品質標準區的固定污染源，主要有兩種管制工具，分別是依據第6條第3項進行指定削減，以及依據第8條第3項進行總量管制。三級防制區指定削減功能在於能夠快速規範大型排放製程進行技術減量，而總量管制目的在於確保區域空氣污染物排放量不增量。本計畫於今年協助環保署完成高屏總量管制計畫及相關子法的研訂，同時參考美國RECLAIM計畫執行經驗，規劃下階段如需持續推動總量管制計畫，應可透過訂定合理可行之技術減量規範，促使區域排放量實質減少。另一方面擬定三級防制區指定削減準則，針對大型污染排放行業電力、鋼鐵、水泥等，訂定技術管制規範標準，並規劃分期程進行其他行業別的管制。前述兩項工作皆以污染防制技術為基礎，訂定業者確實可達成的污染削減目標，預期應可大幅減緩空氣污染物之排放情形。總結本計畫成果，已分析近11年715家定期檢測數據訂定出25種製程之技術規範及指定削減原則，並完成6項法規之修正草案。

總量管制、既存固定污染源削減、排放量削減

期末報告公開版.pdf

6MB

期末報告公開版

2019/4/13 上午 12:00:00

According to Air Pollution Control Act, there are two main strategies to regulate stationary sources in non-attainment area: designated reduction and total quantity control. The function of designated reduction in non-attainment area is to drive the rapid technological reduction of major stationary sources. In another hand, total quantity control aims to ensure the total emission quantity in this area would not increase. Thus, air quality can be improved rapidly through both methods. The Kao-Pin Total Quantity Control Plan had been revised in this project this year, meanwhile; refer to the US RECLAIM program implementation experience, the regional emission will reduce through the next phase of Kao-Pin Total Quantity Control Plan. Besides, the designated reduction guidelines for non-attainment area have been formulated, and the technical regulations have been built to control the large pollution emission from power, steel, and cement industries. Other industries may be regulated in different periods and the technical regulations will also be examined individually. The above two tasks, which were based on the pollution prevention technology, set the pollution reduction goals that the industry could achieve. Thus, the targets of the regulations for stationary emissions sources in non-attainment area are very clear right now. Conclusively, this program analyzed inspection of air pollution sources in 715 factories in these 11 years and formulated technical regulation of 25 kinds of manufacture processes and the principle of pollutant reduction, and revision of 6 regulations.

Total quantity control, Emission reduction, reduction of pollutants from existing stationary pollution sources