108

930 千元

2019/05/03

2019/12/31

許長嵐

環檢所

游廷華

環科工程顧問股份有限公司

環境監測及檢測

固定污染源、管制策略、許可、資料庫

stationary sources, control strategy, permit, database

蔡智琦

蔡智琦

02-27753919#276

francis@estc.tw

為強化107年度開發之固定污染源與檢測機構申報資訊應用管理系統功能之應用，本計畫依據計畫目標執行固定污染源系統與行程申報系統數據品質提升，優化相關資訊比對欄位，提升勾稽比對正確率，更進一步的新增試車檢測、稽查檢測等相關資料數據介接，並依不同檢測目的、不同檢測機構作為參數之比較功能，以強化資訊系統之應用，今（108）年度相關執行成果說明如下： (一) 持續介接檢測行程通報與結果申報資料及自動交換功能 本計畫延續107年度資料介接作業，今（108）年度針對固定污染源資訊管理系統與環境檢測機構管理資訊系統自102年度檢測資料進行勾稽比對，並完成自動化資料介接與交換設定作業，以利即時掌握比對資訊。 (二) 完善系統之資料庫及新增資料介接項目 為擴充系統比對資料及提升應用功能，今（108）年度除介接許可試車與一般稽查等不同檢測目的之檢測資料外，同時針對固定污染源檢測時應紀錄之污染源與防制設備操作條件一併納入系統以利掌握檢測當時狀況與比對差異。 (三) 建立事業單位檢測歷史資料，優化資料庫之欄位格式及資料 本計畫為提升系統勾稽比對正確率，針對檢測位置、污染物名稱及檢測申報勾稽比對方式進行資料庫優化與欄位調整，提升資料庫排放管道欄位比對正確率與污染物名稱一致化；此外，本計畫並藉由不同檢測目的，比對固定污染源蒸氣鍋爐定期檢測與稽查檢測差異情形，作為管制參考。 (四) 開發各類檢測值趨勢分析比較功能，作為多次委託分析之參考 本計畫利用今（108）年度新增介接不同檢測目的之資料及其歷史資訊，完成圖像化趨勢比較應用功能，主管機關可透過指定時間內比對行程申報與檢測結果申報之多次委託情形與申報差異，並藉由歷史趨勢圖配合相關操作條件檢視其差異情形。

固定污染源、管制策略、許可、資料庫

部分公開版.pdf

3MB

2020/1/1 上午 12:00:00

In order to strengthen the application of the information application management system function of the fixed pollution source and testing agency developed in the year of 2018, the project implements the data quality improvement of the fixed pollution source system and the travel declaration system according to the project target, optimizes the relevant information comparison field, and improves the check ratio. For the correct rate, further new test data, inspection and other related data are introduced, and according to different testing purposes, different testing institutions as parameter comparison functions, to strengthen the application of information systems, this annual implementation The results are as follows: (1) Continuously interface inspection and notification report and result declaration data and automatic exchange function This project continues the 2018 data interface operation. In this year, the fixed pollution source information management system and the environmental testing organization management information system were compared with the 2013 annual inspection data, and the automated data interface and exchange setting operations were completed. Eli timely grasp the comparison information. (2) Improve the database of the system and the new data connection project In order to expand the system comparison data and enhance the application function, in addition to the test data for different test purposes such as permit test and general audit, in this year, the pollution source and control equipment operating conditions should be recorded for the fixed pollution source test. And included in the system to facilitate the detection of the current situation and comparison differences. (3) Establishing historical data of the institution and optimizing the format and data of the database In order to improve the accuracy of the system check, the plan optimizes the database and adjusts the field for the detection location, the name of the pollutants, and the inspection and declaration method, and improves the correctness rate and the name of the pollutants in the database. In addition, the program uses different inspection purposes to compare the differences between the periodic inspection and inspection of fixed-source steam boilers as a regulatory reference. (4) Develop various types of detection value trend analysis and comparison functions, as a reference for multiple commission analysis The plan uses the information and historical information of different detection purposes in this year to complete the application of the image trend comparison application. The competent authority can report the multiple times of the travel report and the test results through the specified time. The entrustment situation is different from the declaration, and the historical trend graph is used to check the difference between the situation and the relevant operating conditions.

stationary sources, control strategy, permit, database