Summary of Results
The project items include assisting Environmental Protection Bureau on examination of stationary source permitting, licensing checks, inspection of surrounding factories, Continuous Emission Monitoring Systems check, case counseling, regulatory factory database update works, on-site permitting documents, examination, flue monitoring and examining works, decree revision workshop, and fugitive particulate matter management practices conformity check, and poor air quality of emergency response, and hazardous air pollutants surveys. This project has progressed in line with expectations. The following description Summary of Results.
1.Permit review:
There are 220 were permitted in the program during the execution. There are 170 permit licenses in addition to the conversion basic information. Average number of days reviewed was 18.3 days, 1.1 days less than last year.
A total of 170 processes was checked, with the 35% of a total process number. The results of all checked processes indicated that there were 11 unqualified processes, in terms of unqualified rate of 6.5%.
2. Analysis of Pollutant Discharge Changes
Particulate Contamination：As of November 30, 2021, particulate emissions have been reduced by 136.666 tons per year in the overall control process. The reduction was mainly due to reduced production or work in six sand and rock quarrying and processing factories and a reduction in emissions of 153.896 tons.
Sulfur oxides：After the database update and maintenance operations, sulfur oxides 55.769 tons decrement. The reduction was mainly industrial boilers need to meet the stack emission standards.
Nitrogen oxides：After database update and maintenance work, NOx increased by 34.854 tons The increase in emissions was due to the establishment of new combustion sources at the factory.
Volatile organic compounds：After the database update and maintenance operations, volatile organic compounds 60.311 tons increments. In which a substantial change in emissions of pollution, automotive surface coating industry Honda Motor Co, Ltd. The Taiwan coating amount of increase, resulting in pollution, increased 30.745 tons.
3. Air Pollution Control Fee Collection System：
By the third quarter of 2021, the number of air pollution control fee system regulators is 523. Increased control of 74 factories and screening of 7 plants compared to 2021. Completed the check of the air pollution fee declaration of the 1984 factories, and the achievement rate was 117%.
4. Emission Standard inspection：
According to statistics until November 30, 2021, 3 of the discharge pipeline inspections performed due to public incidents were punished for exceeding the emission standards. All of them are required to complete the improvement within a time limit.
5. Management Regulations for Facilities to Control Fugitive Dust Air Pollution from Stationary Pollution Sources：
In terms of implementation of Management Regulations for Facilities to Control Fugitive Dust Air Pollution from Stationary Pollution Sources. The qualified rate of regulations increased from 53% in 2010 to 93% in 2021. Will continue to advocate the factory should strengthen equipment inspection and maintenance work, and with other related project plans to strengthen the frequency of illegal factory inspection. Promote factory self-restraint, thereby improving regulatory compliances.
6. Stationary sources of air pollution reduction practices：
In 2021 , tutored 5 factories to reduce pollution emissions. Implement boiler replacement or improvement policies. A total of 24 boilers completed improvements in 2021. In addition, promote the implementation of composite control measures in sand and rock quarrying and processing factories.
7.Control VOC Emissions from Gas Stations
At present, the inspection of 635 fuel guns in 67 gas stations has been completed, and 615 of them are qualified, with a pass rate of 96.9%.
To achieve good publicity, hold a "Gas Station Air Pollution Control Awareness Conference" and promote the installation of micro-pressure meters. The project team has completed the installation of micro-pressure meters at 26 gas stations.
8.Control results of poor air quality AQI days
On days with poor air quality, designated factories implement pollution prevention plans, and the project team shall also go to the site to carry out patrol inspection. And then our team also carried out on-site inspection of 613 factories during the poor air quality days. Estimated emission of pollutants after implementation of the contingency Par.1.481 tons, SOx 10.229 tons, NOx 10.167 tons and VOCs 41.746 tons.
9. Inventory of unregulated factories
Inventory operations for unregulated factories that have newly obtained legal certificates or temporary certificates. In 2021, the inventory of 50 factories has been completed, of which 44 factories have been included in the EPA's air pollution control database. Total additional emissions were Par.40.759 tons, SOx 0.715 tons and NOx 15.143 tons.
