環保專案成果報告查詢系統

專案計畫編號	110A181
經費年度	110
計畫經費	12,950 千元
預算科目	廢棄物管理-事業廢棄物管理
專案開始日期	2021/03/19
專案結束日期	2021/12/10
專案主持人	黃馨
主辦單位	廢管處
承辦人	吳郁煌
執行單位	環興科技股份有限公司
專案分類	廢棄物管理
中文關鍵字	工業廢棄物、餘裕量處理、戴奧辛、工業污泥、電弧爐爐碴、木材、混燒灰渣、環保科技園區
英文關鍵字	Industrial waste, surplus capacity treatment , Dioxin, Industrial sludge, Electric Arc Furnace Slag, Waste Wood, Co-firing ash ,Environmental Science and Technology Parks
協同主持人
共同主持人
計畫聯絡人	黃馨
計畫聯絡電話	02-27691366#10353
計畫聯絡信箱	hsinh@mail.sinotech-eng.com

中文摘要	本計畫共包含五個工作項目，茲分別說明各項工作成果。一、完成統計調查近4季可能有清理問題之廢棄物產出清理及資源化情形及設施量能，並選定清理較有問題之產業別進行訪視輔導，研提清理管理建議。二、輔導工業區有清理問題之產源事業妥適分類，就高熱值廢棄物較有問題者，透過檢測分析廢棄物物化特性及產源訪視輔導，提供業者提升再利用回收效能建議，並協助其媒合，辦理3件區域性聯合清除運作機制，建立聯合清運模式。三、完成戴奧辛分年調查追蹤作業(第4年期)，完成建立3類行業別戴奧辛圖譜資料。四、完成辦理固體再生燃料燃燒後衍生灰渣做為磚及CLSM工程性質測試，提出SRF混燒灰渣再利用用途之可行性報告。五、完成每季4處環保科技園區追蹤查察作業，彙整園區營運概況。另協助提出「事業廢棄物處理設施餘裕處理容量許可管理辦法」修法草案，簡化申請程序。
中文關鍵字	工業廢棄物、餘裕量處理、戴奧辛、工業污泥、電弧爐爐碴、木材、混燒灰渣、環保科技園區

中文摘要

本計畫共包含五個工作項目，茲分別說明各項工作成果。一、完成統計調查近4季可能有清理問題之廢棄物產出清理及資源化情形及設施量能，並選定清理較有問題之產業別進行訪視輔導，研提清理管理建議。二、輔導工業區有清理問題之產源事業妥適分類，就高熱值廢棄物較有問題者，透過檢測分析廢棄物物化特性及產源訪視輔導，提供業者提升再利用回收效能建議，並協助其媒合，辦理3件區域性聯合清除運作機制，建立聯合清運模式。三、完成戴奧辛分年調查追蹤作業(第4年期)，完成建立3類行業別戴奧辛圖譜資料。四、完成辦理固體再生燃料燃燒後衍生灰渣做為磚及CLSM工程性質測試，提出SRF混燒灰渣再利用用途之可行性報告。五、完成每季4處環保科技園區追蹤查察作業，彙整園區營運概況。另協助提出「事業廢棄物處理設施餘裕處理容量許可管理辦法」修法草案，簡化申請程序。

中文關鍵字

工業廢棄物、餘裕量處理、戴奧辛、工業污泥、電弧爐爐碴、木材、混燒灰渣、環保科技園區

類型	檔名	檔案大小	說明	最新版公開日期
期末報告	1519C_期末報告定稿全文公開版.pdf	21MB		2022/1/4 上午 12:00:00

摘要	The project included five major work items, the following described each parts results of the work. Firstly, the cleanup and recycling status of industrial waste that difficult to cleanup and the capacity of those waste disposal organizations were investigated near the four seasons and those waste. By tracking the waste of industries, this project has supported the management proposal. Secondly, this project guided the proper classification of the manufacturing business in the industrial park, and provided advice for the industry to improve the recycling efficiency through analyzing the physical and chemical characteristics of the waste samples and counseling industries with high calorific value waste. In addition, it assisted its matching, handled three regional united clearance mechanisms, and set up a united clearance model. Thirdly, completed the project planned dioxin tracking investigations for five years (fourth year), including creating dioxin fingerprints data for 3 industries. Fourthly, completed testing the properties of the bricks and CLSM which were manufactured by the ash from the combustion of solid renewable fuels, and proposed a feasibility report for the recycling of mixed-fired ash from SRF. Fifthly, the quarterly inspection of four Environmental Science and Technology Parks was finished. Their operational data were also collected and organized, and furthermore, this project proposed the amendments of the “Industrial Surplus Capacity Treatment Waste Permit Management Regulation (draft)”, simplified application procedures.
英文關鍵字	Industrial waste, surplus capacity treatment , Dioxin, Industrial sludge, Electric Arc Furnace Slag, Waste Wood, Co-firing ash ,Environmental Science and Technology Parks

摘要

The project included five major work items, the following described each parts results of the work. Firstly, the cleanup and recycling status of industrial waste that difficult to cleanup and the capacity of those waste disposal organizations were investigated near the four seasons and those waste. By tracking the waste of industries, this project has supported the management proposal. Secondly, this project guided the proper classification of the manufacturing business in the industrial park, and provided advice for the industry to improve the recycling efficiency through analyzing the physical and chemical characteristics of the waste samples and counseling industries with high calorific value waste. In addition, it assisted its matching, handled three regional united clearance mechanisms, and set up a united clearance model. Thirdly, completed the project planned dioxin tracking investigations for five years (fourth year), including creating dioxin fingerprints data for 3 industries. Fourthly, completed testing the properties of the bricks and CLSM which were manufactured by the ash from the combustion of solid renewable fuels, and proposed a feasibility report for the recycling of mixed-fired ash from SRF. Fifthly, the quarterly inspection of four Environmental Science and Technology Parks was finished. Their operational data were also collected and organized, and furthermore, this project proposed the amendments of the “Industrial Surplus Capacity Treatment Waste Permit Management Regulation (draft)”, simplified application procedures.

英文關鍵字

Industrial waste, surplus capacity treatment , Dioxin, Industrial sludge, Electric Arc Furnace Slag, Waste Wood, Co-firing ash ,Environmental Science and Technology Parks