EPA-112-XA04

112

3,500 千元

補助及獎勵回收清除處理暨再生利用

2023/02/18

2023/11/30

鄭加新

循環署回收基金管理會

蔡雅如

漾拓國際股份有限公司

資源循環

發光二極體平板燈、環境化設計、產品服務化商業模式

light emitting diode panel light, environmental design, product-as-a-service business model

鄭素琴

02-55960123#

suchin.cheng@gmail.com

本計畫「建構LED燈具循環材料與產品服務化低碳商業模式研發計畫」 工作項目包括：(1)開發與生產綠色設計的LED平板燈，於三個場址分別應 用、租賃綠色設計燈具、申請碳排抵換專案；(2)完成LED平板燈拆解比較報 告；(3)研發廢LED鎵回收技術；(4)研提LED照明燈具租賃業環保標章規格 標準草案；(5)研議LED照明燈具於ESG和淨零碳排之應用。執行成果包括 完成模組化綠色設計的LED平板燈，比T5螢光燈管節能70%，比市售LED 平板燈節能減碳13~58%。三個場址應用中，分別為兩個場址替代T5螢光燈， 一場址替代一般LED燈具。其減碳效益，分別為70%、60%、35%。完成LED 平板燈拆解比較報告，本計畫綠色設計平板燈具備最高的可拆解易維修性。 廢LED鎵回收技術研發，完成物料金屬成分分析，篩選出最佳分離回收之無 機酸，及硝酸浸出液製程的最佳化與選擇性沉澱回收鎵。完成LED照明燈具 租賃業環保標章規格標準草案，並提送標章審議程序。研議評析LED燈具之 碳足跡產品類別規則之需求性，照明租賃服務化模式與永續發展目標SDGs 8/9/11/12/17，及與ESG 經濟、環境、社會議題之對應。

發光二極體平板燈、環境化設計、產品服務化商業模式

112漾拓期末報告1203(最終稿).pdf

13MB

期末報告

2024/2/9 上午 12:00:00

This project, titled "Constructing a Circular Material and Product-as-a-Service Low-Carbon Business Model for LED Light Fixtures," includes the following tasks: (1) Development and production of green-designed LED panel lights, implemented in three sites for application, leasing, and applying for carbon offset projects. (2) Completion of a comparative report on the disassembly of LED panel lights. (3) Research and development of rcycling process for recovery of gallium from waste LEDs. (4) Drafting an eco-label specification standard for LED lighting fixture leasing businesses. (5) Discussions on the application of LED lighting fixtures in ESG and net-zero carbon emissions. Outcomes include the completion of modular green-designed LED panel lights, which are 70% more energy efficient than T5 fluorescent tubes and 29~60% more efficient than commercially available LED panel lights. Among the three implemented sites, two sites replaced T5 fluorescent lamps with leased greendesigned panel lights, and one site replaced standard LED flat panels with greendesigned ones. The carbon reduction benefits are 70%, 60%, and 35%, respectively. The comparative report on LED panel light disassembly confirms that our greendesigned panel light has the highest disassembly and maintainability. We completed material metal composition analysis for the waste LED and gallium recycling technology, selecting the optimal inorganic acid for separation and recovery, optimising the nitric acid leaching process, and selective precipitation recovery of gallium. We also completed the draft of the eco-label specification standard for LED lighting fixture leasing businesses and submitted it for specification standard review procedure. Research and analysis were conducted on the necessity of carbon footprint product category rules for LED panel light, the lighting-as-a-service model with SDGs 8/9/11/12/17, and corresponding ESG economic, environmental, and social issues.

light emitting diode panel light, environmental design, product-as-a-service business model