環保專案成果報告查詢系統

專案計畫編號	EPA-112-FA12-03-AA119
經費年度	112
計畫經費	11,820 千元
預算科目	固定污染源管制
專案開始日期	2023/03/10
專案結束日期	2023/12/30
專案主持人	沈克鵬
主辦單位	環境部大氣環境司
承辦人	謝知行
執行單位	財團法人工業技術研究院
專案分類	大氣空氣
中文關鍵字	固定污染源、揮發性有機物、管制策略
英文關鍵字	Stationary Pollution Sources, Volatile Organic Compounds, Control Strategies
協同主持人
共同主持人
計畫聯絡人	葉雯琪
計畫聯絡電話	06-3636775#
計畫聯絡信箱	chichiye@itri.org.tw

中文摘要	揮發性有機物(Volatile Organic Compounds，VOCs)為大氣中生成臭氧和PM2.5的重要前驅物，部分VOCs亦為有害空氣污染物(Hazardous Air Pollutants，HAPs)，對民眾健康影響重大。而國內空氣品質的主要影響因素已由前幾年的細懸浮微粒(PM2.5)轉變為臭氧(O3)。因此，環境部大力推動相關VOCs管制措施，期望減少各類污染源之VOCs排放量，藉以改善環境空氣品質及維護民眾健康。本計畫在電子零組件（銅箔基板）製造業和金屬表面塗裝業之VOCs排放現況調查，完成各10家工廠之背景資料調查及VOCs空氣污染管制及排放標準（草案）研擬。在固定污染源VOCs排放特徵調查與研提管制建議，完成塑膠品塗裝作業及印刷電路板製造業各10家工廠調查與相關檢測作業，且參考調查結果及國外管制標準完成空氣污染物排放標準管制研提建議。於推動國內公私場所VOCs調查及減量協談作業，篩選出國內VOCs優先管制行業別，包含射出成型程序及押出成型程序，且完成10家工廠排放現況調查並從中挑選4家辦理VOCs減量討論會議給予建議。此外，進行三項行業製程之VOCs排放係數建置，包含塑膠品表面塗裝、金屬表面塗裝及電子零組件製造業（銅箔基板）等製程。並在2處污染物逸散製程單元完成以臨時性圍封隔間與密閉負壓抽氣方式進行VOCs檢測。並配合計畫執行，完成2場次專諮會及4場次有關凹版印刷業、汽車表面塗裝作業及聚氨基甲酸酯塗布業等法規交流討論會議。
中文關鍵字	固定污染源、揮發性有機物、管制策略

中文摘要

揮發性有機物(Volatile Organic Compounds，VOCs)為大氣中生成臭氧和PM2.5的重要前驅物，部分VOCs亦為有害空氣污染物(Hazardous Air Pollutants，HAPs)，對民眾健康影響重大。而國內空氣品質的主要影響因素已由前幾年的細懸浮微粒(PM2.5)轉變為臭氧(O3)。因此，環境部大力推動相關VOCs管制措施，期望減少各類污染源之VOCs排放量，藉以改善環境空氣品質及維護民眾健康。本計畫在電子零組件（銅箔基板）製造業和金屬表面塗裝業之VOCs排放現況調查，完成各10家工廠之背景資料調查及VOCs空氣污染管制及排放標準（草案）研擬。在固定污染源VOCs排放特徵調查與研提管制建議，完成塑膠品塗裝作業及印刷電路板製造業各10家工廠調查與相關檢測作業，且參考調查結果及國外管制標準完成空氣污染物排放標準管制研提建議。於推動國內公私場所VOCs調查及減量協談作業，篩選出國內VOCs優先管制行業別，包含射出成型程序及押出成型程序，且完成10家工廠排放現況調查並從中挑選4家辦理VOCs減量討論會議給予建議。此外，進行三項行業製程之VOCs排放係數建置，包含塑膠品表面塗裝、金屬表面塗裝及電子零組件製造業（銅箔基板）等製程。並在2處污染物逸散製程單元完成以臨時性圍封隔間與密閉負壓抽氣方式進行VOCs檢測。並配合計畫執行，完成2場次專諮會及4場次有關凹版印刷業、汽車表面塗裝作業及聚氨基甲酸酯塗布業等法規交流討論會議。

中文關鍵字

固定污染源、揮發性有機物、管制策略

類型	檔名	檔案大小	說明	最新版公開日期
期末報告	FY112_固定污染源揮發性有機物管制及輔導減量計畫_成果報告(公開版_刪除空白頁).pdf	9MB		2024/4/1 上午 12:00:00

摘要	Volatile Organic Compounds (VOCs) are major precursors of ozone (O3) and fine suspended particulate matter (PM2.5) formation in the atmosphere. Some VOCs are known as Hazardous Air Pollutants (HAPs), which have serious health consequences for the public. Over the past few years, the main factor impacting domestic air quality has shifted from PM2.5 to O3. As a result, the Ministry of Environment has made every effort to promote VOCs control measures in the hope of reducing VOCs emissions from various pollution sources, thereby improving environmental air quality and safeguarding the public’s health. This project investigated the VOCs emission statuses of the electronic component manufacturing industry and the metal surface coating industry. The background information of ten factories was investigated, and VOCs air pollution control and emission standards (drafts) were formulated. Investigation and testing operations were completed at ten factories from the plastic product coating industry and the printed circuit board manufacturing industry to determine the characteristics of VOCs emissions at fixed pollution sources. Subsequently, recommendations for air pollution control and emission standards were formulated with reference to the investigation results and foreign control standards. Public and private domestic factories were screened for prioritization of VOCs control, and the injection molding and extrusion molding processing industries were selected for the promotion of VOCs surveys and reduction negotiation operations. After investigating ten factories’ emission statuses, four of the factories were chosen as sites to hold VOCs reduction discussion meetings, and suggestions were made. Furthermore, VOCs emission coefficients were established for three industrial processes: plastic product surface coating, metal surface coating, and electronic component (copper foil substrate) manufacturing. VOCs testing was carried out using two pollutant dispersal process units. This was accomplished by constructing temporary enclosed compartments and employing sealed negative-pressure air extraction methods. Two specialized consultation meetings and four discussion meetings on regulatory exchanges (focusing on the intaglio printing industry, the automotive surface coating industry, and the PU synthetic leather manufacturing industry) were completed as part of the project’s execution.
英文關鍵字	Stationary Pollution Sources, Volatile Organic Compounds, Control Strategies

摘要

Volatile Organic Compounds (VOCs) are major precursors of ozone (O3) and fine suspended particulate matter (PM2.5) formation in the atmosphere. Some VOCs are known as Hazardous Air Pollutants (HAPs), which have serious health consequences for the public. Over the past few years, the main factor impacting domestic air quality has shifted from PM2.5 to O3. As a result, the Ministry of Environment has made every effort to promote VOCs control measures in the hope of reducing VOCs emissions from various pollution sources, thereby improving environmental air quality and safeguarding the public’s health. This project investigated the VOCs emission statuses of the electronic component manufacturing industry and the metal surface coating industry. The background information of ten factories was investigated, and VOCs air pollution control and emission standards (drafts) were formulated. Investigation and testing operations were completed at ten factories from the plastic product coating industry and the printed circuit board manufacturing industry to determine the characteristics of VOCs emissions at fixed pollution sources. Subsequently, recommendations for air pollution control and emission standards were formulated with reference to the investigation results and foreign control standards. Public and private domestic factories were screened for prioritization of VOCs control, and the injection molding and extrusion molding processing industries were selected for the promotion of VOCs surveys and reduction negotiation operations. After investigating ten factories’ emission statuses, four of the factories were chosen as sites to hold VOCs reduction discussion meetings, and suggestions were made. Furthermore, VOCs emission coefficients were established for three industrial processes: plastic product surface coating, metal surface coating, and electronic component (copper foil substrate) manufacturing. VOCs testing was carried out using two pollutant dispersal process units. This was accomplished by constructing temporary enclosed compartments and employing sealed negative-pressure air extraction methods. Two specialized consultation meetings and four discussion meetings on regulatory exchanges (focusing on the intaglio printing industry, the automotive surface coating industry, and the PU synthetic leather manufacturing industry) were completed as part of the project’s execution.

英文關鍵字

Stationary Pollution Sources, Volatile Organic Compounds, Control Strategies