EPA-93-E3S4-02-01

093

1,450 千元

2004/04/23

2004/12/31

王吉孚

環檢所

工業技術研究院環安中心 王吉孚

環境監測及檢測

指紋,資料庫,印刷電路板,,,

Fingerprints,Data-base,Printed Circuit Board

王吉孚

(03)573-2991

jean-fu_wang@itri.org.tw

台灣過去30多年來產業的快速發展，造就經濟高度成長，但也衍生了廢棄物處理處置的問題，加上部分業者不守法，而有廢棄物隨意棄置的情形發生。 行政院環保署為掌握國內事業廢棄物產出特性與流向，擬建置各行業別事業廢棄物指紋資料庫，作為日後進行非法棄置行為追查之參考。 本計畫主要以印刷電路板製造業產出之廢棄物進行特性調查，計畫執行期間首先將篩選各行業具代表性廠家，並進行實地採樣檢測。印刷電路板製造業代表性廠家之篩選原則，係針對各行業之製程予以分類，再依此行業經營有成，大型事業具有代表性、廢棄物量大、廢棄物處理方式、地理位置及非屬特定對象等因素予以綜合評定，希望能藉代表性廠家的檢測數據建置出一套可以含括印刷電路板製造業中不同製程、不同規模、不同地理位置等參數在內之指紋資料庫。 為了瞭解在印刷電路板工廠較密集的工業區其廢水及地下水中之污染物質是否與工業區因印刷電路板工廠較密集而所排放的廢棄物有所關聯，本計畫亦將針對國內印刷電路板工廠密度較高的三個工業區，即中壢工業區、平鎮工業區及龜山工業區，分別就工業區廢水、地下水及雨水下水道的廢水進行採樣及檢測，以求取其關聯性。 本計畫欲研究的領域包括：(一)針對國內現存印刷電路板製造業(2730)進行調查，完成25家之產製程與其廢棄物(含廢水/廢液或固體廢棄物/污泥)檢測指紋資料建置；(二)完成相關工業區廢水及地下水樣品至少5件檢測。

指紋,資料庫,印刷電路板,,,

00000377791.pdf

1MB

[期末報告]

2005/3/1 上午 12:00:00

The rapid development of the industries has created highly economic growth in Taiwan for the past thirty years, however, it also derived the treatment and disposal problems of waste, and due to the fact that some manufacturers do not obey the laws and regulations of the wastes, therefore, the illegal dumping has occurred occasionally. In order to control the properties and distribution of these wastes, the Environmental Protection Administration of the Republic of China (EPA-ROC) has decided to set up fingerprinting databases for various industries. These fingerprinting databases will be used for illegal dumping investigation in the future. One of the goals of this project is to survey the wastes produced by printed circuit board (PCB) industry. The representative factories of all PCB industry will be selected at the beginning of this project, then the wastes of these representative factories will be sampled and analyzed. It hopes that, based on the analysis data sampled from these representative factories, a fingerprinting database can be established. This project will also sample and analyze the wastewater and groundwater of three industrial parks to understand the relationship between the wastewater and groundwater of the industrial parks and the wastes produced by the PCB factories. The content of this project includes：(1)to survey and complete the sampling and analysis of the manufacturing process wastes of 25 representative PCB factories of the PCB industry, and then to establish the fingerprinting database；(2)to complete at least 5 samples of wastewater and groundwater from the industrial parks.

Fingerprints,Data-base,Printed Circuit Board