98-99年度環工技師簽證案件查核及管理系統加值程式開發維護專案(第2年)工作計畫
| 中文摘要 | 行政院環境保護署辦理環工技師簽證案件查核，其目的在於了解簽證技師之簽證品質及缺失情形，進而督促簽證技師改進，以提升環工技師簽證品質。另自95年度起開始執行技師執業機構查核，查核重點為工作底稿。 本年度執業機構查核最常出現之缺失為「簽證案件未申報」占75%，其次為「工作底稿首頁未簽署及加蓋執業圖記」占60%，顯示應持續加強「環境工程技師簽證規則」之宣導。水污染現場查核最常出現之缺失為「申請文件中文字及數值未填，填錯或前後不一致」佔70%，其次為「處理單元設計參數及操作參數不合理」佔45%。固定污染源現場查核最常出現之缺失亦為「申請文件中文字及數值未填，填錯或前後不一致」佔90%，「空氣污染物排放量計算錯誤，如公式引用錯誤及排放管道出口高度未以地面高程計算等」佔30%。 此外，為了有效管制技師簽證業務，本計畫同時進行環工技師基本管理系統之規劃與建置工作，藉由網路資料庫提供各級環保主管機關了解技師基本資料、簽證狀況、接受查核結果及獎懲等紀錄，以落實技師簽證管考。 | ||
|---|---|---|---|
| 中文關鍵字 | 簽證，查核，管理系統 | ||
基本資訊
| 專案計畫編號 | EPA-99-K104-02-205 | 經費年度 | 099 | 計畫經費 | 1520 千元 |
|---|---|---|---|---|---|
| 專案開始日期 | 2010/01/01 | 專案結束日期 | 2010/12/31 | 專案主持人 | 楊基振 |
| 主辦單位 | 管考處 | 承辦人 | 黃錦明 | 執行單位 | 台灣省環境工程技師公會 |
成果下載
| 類型 | 檔名 | 檔案大小 | 說明 |
|---|---|---|---|
| 期末報告 | 99環工技師簽證計畫成果報告(詳細版).pdf | 0MB | 99環工技師簽證計畫成果報告(詳細版) |
2009-2010 Registered professional environmental engineer certification case review and management-II
| 英文摘要 | The objectives of the registered professional environmental engineer certification cases review were to understand the quality and defects of certification processed by certified engineers. The results may be used to guide the improvement of certification of engineers to upgrade the quality of certified Professional Environmental Engineers. Also, Started in 2006, the operation of registered professional engineering organizations have been reviewed. The key points focused on work drafts inspection. This year, the review of the operation of registered professional engineering organizations found that the most frequent which made up defect was that " the certification files had not been declared accurately ", around 75% of the total defects. Followed was " the original working manuscript did not have execution seal and signature ", around 60%. The results suggested that there shall be continuous promotion of "Professional Environmental Engineer Certification Regulations." For the review of water pollution sites, the most frequent defects were that "in the application documents, texts and values were not filled in, incorrect or inconsistent", around 70%. The next frequent defect was "unreasonable treatment unit design parameters and operational parameters", around 45%. The most frequent defect appeared on stationary source onsite review was also "in the application documents, texts and values were not filled in, incorrect or inconsistent", around 90%. Followed by "Incorrect calculation of air pollutants release quantities, such as the use of incorrect equations, and discharge pipe exit height did not calculated based on ground heights", around 30%. In addition, to effectively manage the professional engineer certification process, this program established the Registered Professional Environmental Engineer management information system. Through an Internet database, information was provided to every level of environmental control management organizations to make available basic information on professional engineers, including their certification status, review results, and award and punishment received, to improve the management of professional engineer certifications. | ||
|---|---|---|---|
| 英文關鍵字 | certification, review, management information system | ||