環境資源報告成果查詢系統

100年度離島工業區空氣污染管制資訊整合計畫

中文摘要 本年度「離島工業區空氣污染物資訊整合計畫」自100年4月1日起開始執行,本年度主要工作項目包含針對離島工業區空氣中揮發性有機化合物(含有害空氣污染物)進行調查並將結果建置指紋資料庫,同時整合環保局目前各異質資料庫,建置離島工業區中央監控資料倉儲整合系統,透過資料倉儲整合運用開發中央監控系統,提供快速諮詢及資料分析工具,此外並針對中央監控系統相關硬體及網路設備進行建置,並運用通訊技術開發緊急應變快速查詢系統,輔助環保局進行快速資訊查詢及反應,最後將彙整六輕十年總體檢各相關計畫分工執行成果資料並定期彙報環保署,計畫中並提供雲林縣環保局及離島工業區空氣污染物管制相關計畫之教育訓練與技術轉移。 本年度計畫各工作項目執行成果,主要如下: 一、在整合各異質資料庫,建置離島工業區中央監控資料倉儲整 合系統中,本工作項目主要協助環保局針對對六輕相關委辦計畫所控管的各項資訊、資料庫進行整合。經由對各計畫資料庫進行各系統資料庫調查、欄位及格式分析等作業,運用資料倉儲進行資料整合及加值運用,本年度已納入資料倉儲的資料庫包含固定污染源資料庫、CEMS/FLARE資料庫、固定源稽查資料庫、空品及氣象測站資料庫、移動員攔檢資料庫、陳情案件管控資料庫、GHS MSDS資料庫、VOC檢測資料庫等。透過以上資料庫整合,經由資料倉儲的建立提供給系統做為後端資料來源取用。 二、在開發中央監控系統,提供快速諮詢及資料分析工具作業中,主要是運用建立的資料倉儲做為資料來源,並依據環保局現況需求進行中央監控系統功能開發,透過系統可提供快速諮詢及資料分析。針對中央監控系統功能需求,並本年度已完成固定源資料查詢功能,並以GoogleMap電子地圖模式呈現工廠定位資料,在固定源資料面上,已完成的功能包括固定源工廠基本資料、製程資料、排放管道、原物料使用、檢測資料、防治設備資料、CEMS資料、FLARE及許可證等相關資訊查詢查詢、其他查詢功能,則完成空氣品質監測站資料查詢、GHS危害物資料查詢及各計畫報告上傳及計畫查核資料庫查詢、陳情案件建檔與查詢功能、固定源稽巡查記錄查詢、各類污染物種百大查詢、工業區異常通報查詢功能及揮發性有機物資料查詢等。在大門及排放管道座標定位作業上,已完成21廠424根之定位。 三、在建置中央監控系統相關硬體及網路設備上,目前已經完成各類所需硬體設備採購,包含兩部伺服器、網路設備、網路防火牆、遠端電源管理器、不斷電系統及機櫃設備等,所有硬體設備均已架設完成作業。 四、在緊急應變系統建置上,目前已經完成新版物質安全資料表 的資料來源蒐集與整理,並將整理完成之後的GHS格式物質安全資料表資料行資料格式化,輸入至本計畫所開發之物質安全資料表資料庫內,迄今已完成6846筆危害物質資料建檔作業,並開發線上查詢功能,使用者可以根據化學品基本資料、物性、毒性及生態性進行資料查詢。 五、本年度空氣中揮發性有機化合物調查分為六次採樣共檢測72點,總計分析出157種揮發性有機化合物,其中有害及有毒空氣污染物種有43種,佔總物種數27%,另由總物種次來看計有358種次,其中有害及有毒空氣污染物種數有142種次佔總物種次數40%,從各次檢測物種數來看以第二次採樣出現96種最多,而第二次採樣區域皆在輕油廠,其次為第四次採樣81種其採樣點分佈於台塑MMA、AN、C4、AE、塑化OL-1、台化AROMA-1、PTA、PS、HAC、台化廢水廠,而各次採樣有害及有毒空氣污染物種數檢出最多的則是第四次採樣有33種,其次為第三次採樣29種。從檢測濃度分析,除了丙烯醛有三點其測值分別為3.8 ppb、2.1 ppb及29.7 ppb超過管制標準(2 ppb)外,其餘各點均符合管制標準,而丙烯醛其可能來自於檢測點上風處製程原、物料洩漏,因光化反應生成或高溫氧化生成,從管道排放。 六、在指紋資料建置作業上,本計畫除已完成六輕各場所使用原物料及產品之建置外亦增加99及100年六輕所提報排放管道之成分分析資料與本計畫所執行之空氣中揮發性有機化合物檢測結果資料之建置,目前排放管道建置率為70%,可提供相互比對及查詢的功能。 七、本計畫目前已完成二場次教育訓練,第一場次教育訓練已於4/21辦理完成,活動主題為參訪仁大工業區環境監測中心,瞭解環境監測中心之設置與運作情形,以做為未來規劃相關業務之參考,第二場次於8/15舉辦,會議目的為介紹「中央監控系統」架構及操作介面,並聽許與會人員意見,以便進行後續系統修正及功能增列,第三場次於11/10辦理,訓練內容上線實際操作「環境監控系統」各項功能。 八、100年第一次六輕十年總體檢執行進度與成果業已彙整完成並陳報環保署;六輕自主管理追蹤已藉由5月24日辦理之第一次六輕工業區污染管制檢討會中請六輕針對柴油車自主管理辦理情形及VOCs減量規劃作專案說明;六輕歷屆環評承諾事項後續辦理情形,業已於9月23日第二次六輕工業區污染管制檢討會中請六輕做專案說明,有關空氣污染管制部分皆已完成或階段性完成;第三次檢討會已於12月30日辦理,主要議題則為請六輕報告本(100)年各污染源改善成果(含防制措施、排放減量等)及下(101)年度預期改善目標與成效及新修正法規辦理情形(含規劃)。
中文關鍵字 100年度離島工業區空氣污染管制資訊整合計畫

基本資訊

專案計畫編號 經費年度 100 計畫經費 6380 千元
專案開始日期 2011/04/01 專案結束日期 2011/12/31 專案主持人 王玠斌
主辦單位 雲林縣環境保護局 承辦人 郭子衛 執行單位 元科科技股份有限公司

成果下載

類型 檔名 檔案大小 說明
期末報告 100年度離島工業區空氣汙染管制資訊整合計畫.rar 37MB

Air Pollutant Control Information Integration Project in the Coastal Industrial Park in 2011

英文摘要 The project “Air Pollutant Information Integration in Coastal Industrial Park” has been executed since April 1st, 2011. The annual project contains several tasks, including investigation of volatile organic gas/ VOCs in the air at Coastal Industrial Park, building up fingerprint database for the investigated results, integrating current different database under Environmental Protection Bureau, establishing “Coastal Industrial Park Central Control Data Warehouse Integration System”, and expecting to provide service for quick search and data analysis tool by the development of central control system through the integration of information from data warehouse. In addition, the establishment of central control facilities is also processing, such as hardware and internet device; the emergency response quick search system developed by communication technology application helps the Environmental Protection Bureau to have quick info search and response. And finally collecting all the data from “Coastal Industrial Park ten-year Entire Examination “and reporting to EPA, as well as providing information and knowledge to Environmental Protection Bureau, Yunlin County for further education and skill training of air pollutant management in coastal industrial park. Up to now, the results of project execution are as below: To integrate among several heterogeneous databases and to establish the central control system of Coastal Industrial Park, the project is aim to assist Environmental Protection Bureau to integrate the information and database of Sixth Naphtha Cracking Plant related projects. Due to not only survey and analyze the blank and format on individual database, but also use database warehouse to execute data integration and multi usages, below are databases which had been brought into the data warehouse, including: Stationary Source database, CEMS/FLARE database, Stationary Source Check database, Air Quality and Meteorological Observation database, Mobile Source Examination database, Petition Management database, GHS MSDS database, and VOC Examination database. Through the cross integration from upper databases and the establishment of data warehouse will provide the source for system. While developing the Central Control System and providing quick consultation and data analysis, the data warehouse is the core resource. According to the system needs, the query function of Stationary Source has been added in this year. Moreover, the location of factories will show by the Google Map mode. In other words, users may find below information, including: basic information of factories, information of manufacture process, ways of emissions, usage of materials, examination data, prevention equipment data, CEMS data, FLARE, Permissions, GHS harm database, project upload, Air Quality and Meteorological Observation database, Mobile Source Examination database, Petition Management database, GHS MSDS database, VOC Examination database, Industrial Park Report System and so on. Meanwhile, at the location of gate and emission pipe, one had finished the 424 stacks in the 21st factory. While establishing the Central Control System and related hardware and internet equipments, one has finished the purchase and establishment. One had bought below hardware including, two servers, the remote power management, UPS system and the cabinet. Also, HINET 12M optical fiber is the core transmission way, and the 8M optical fiber is the back up. Through NetWork Load Balance, one could control the bandwidth of Internet. And the back will establish a firewall to carry out the information security to avoid the improper hack and attack. One even use separate hard disks and machines to back up data at the same time to prevent the data loss and damage. This project had developed an emergency system to provide graphical user interface to query the floor plan of each factories park, the location of dangers and harms, and MSDS. We had also finished the source collection and management of GHS MSDS database, and had built a format to input the MSDS which we had developed. There are 6,846 filing data in this MSDS. Through the online query, users may search data according to basic information, material feature, toxic, and ecology. The annual investigations of VOCs in the air are divided into 6 times to sample. After examining 72 points, there are 157 kinds of organic compounds. Insights to view, there are 43 kinds (27%) are HAPs. In total 358 species, there are 142 HAPs (40%). The second sampling is around naphtha factory. And till the 4th sample (81 sample spots) are over FPG MMA, AN, C4, AE, OL-1, AROMA-1, PTA, PS, HAC, and Point Loma Waste Treatment Plant. Beyond several sampling, the most HAPs had been examined is the 4th time (33 kinds) and 3rd time (29 kinds). According to the analysis of concentration, only acraldehyde is over limitation (2 ppb), and the statics separately are 3.8 ppb, 2.1 ppb and 29.7 ppb. Acraldehyde may occur by the leak of raw materials while processing at the check point and due to photochemical reactions or high temperature oxidation, it may be emitted through pipes. This project has finished the establishment of materials and products in Sixth Naphtha Cracking Plant and also added the analysis of emissions in year 99 and 100. This examination result provides a function to compare and query. Nowadays, the establish rate of emission pipe is 70%, and fingerprint database could provide the function of query and compare. This project has host 3 educational training, the first educational training had been held on Apr 21st. The topic is to visit the Environmental Monitor Centre of Ren Da Industrial Park Service Center to understand the set and operation status for future planning related business. The second educational training had been held on Aug 15th. The topic is to introduce the framework and User Interface of Central Monitor System. We coordinate many participators’ opinions so that we could carry out the follow up modification and adding more functions. The third educational training is held Nov 10th. The topic is to practically use the Environmental Monitor System and try each function. The overall process and status update had been reported to EPA. The self-tracking of Sixth Naphtha Cracking Plant had been showed on the first review conference which also mentioned about the diesel car self-management and VOCs reduction plan. In addition, the follow up detail of commitment during environmental evaluation has also been explained during the second review conference on Sep 23rd. And the Air Pollution Control has been done gradually. The 3rd reviewing meeting has been held on 30th December, which included two themes: 1. The report on achievement of pollution sources improvement in Sixth Naphtha Cracking Plant, 2011 version, including protection measures and emission reduction. 2. The goal and progress of annually planned improvement and the status of revised regulation implementation, including plan.
英文關鍵字 Air Pollutant Control Information Integration Project in the Coastal Industrial Park in 2011