環保專案成果報告查詢系統

專案計畫編號
經費年度	102
計畫經費	22,501 千元
專案開始日期	2013/03/23
專案結束日期	2014/03/22
專案主持人	苗宛陶
主辦單位	桃園市政府環境保護局
承辦人	陳奐宇
執行單位	台灣曼寧工程顧問股份有限公司
專案分類	大氣空氣
中文關鍵字	固定污染源;許可;空污費
英文關鍵字	stationary pollution sources;permit;air pollution fee
協同主持人	卓啟弘
共同主持人
計畫聯絡人	詹成家
計畫聯絡電話	03-3310934#201
計畫聯絡信箱	jackynick@email.twml.coml.tw

中文摘要	本項計畫為延續性之管制計畫，計畫執行主要分為三個部分：一、執行各類空氣污染物污染減量工作，包括硫氧化物、氮氧化物、粒狀污染物及揮發性有機物等；二、落實固定污染源許可管理工作；三、擴大經濟誘因策略，包括空污費收費、獎勵、及補助。以掌握本縣固定污染源污染特性及排放現況，並協助擬定固定污染源空氣污染管制策略及行動方案，進而維護本縣空氣品質。本計畫之執行期程自102/3/23至103/3/22止，共計12個月，各項作業執行進度皆依預定行程執行，執行內容包括：資料庫維護更新與管理、執行許可制度(包含審查作業及查核作業)、辦理空污費催補繳、審查及查核、執行排放量網路申報審核、工業區查核作業、辦理各類宣導說明會等工作項目。計畫執行期間固定源列管2,667家，列管製程數以機械設備製造修配業、紡織、印染業、化學製品製造業居多。在計畫期間針進行37家清查作業，查核結果同時回饋至固定源系統及環保署「排放量管理計畫」進而更新TEDS8.0版本資料，另統計計畫執行期間空氣污染物年排放量分別為：粒狀污染物2,189.415公噸/年，硫氧化物3,674.449公噸/年，氮氧化物6,139.259公噸/年，揮發性有機物5,873.361公噸/年。本年度重點工作為工業區查核管制作業，篩選觀音工業區及林口工三工業區進行現場清普查322家，現階段掌握觀音工業區總進駐廠家為344家，已清普查279家，掌握率為81.1%，林口工三工業區進駐家數為53家，已清普查43家，掌握率為81.13%，針對該部分也查獲8家新增列管之公私場所應納入空污費管制及申請操作許可證。其它具體工作成果包括：完成許可審查1,464個製程並核發961張許可證、完成220個製程許可查核作業、掌握1,401家空污費徵收對象並執行438件催補繳（17,357,567元）及574家次之空污費現場查核、完成101年第4季~102年第3季空污費審核、核收結算等工作，各項相關作業內容及詳細成果，均分述於本報告各章節中。建議計畫執行仍可就以下項目採取較精進之做法，包括：  加強生煤管制，提升後續資料分析之效率，建議建立生煤資料整合系統，將空污費、排放量、操作許可資料、定檢資料等進行整合，提供更快速、方便、確實及合理的資訊，作為策略擬定之參考。  針對空污費收費方式及排放量申報基準，建議環保署應盡快整合排放量申報系統，而讓空氣污染物排放量確認，除空污費收費更為精準，其他污染管制規劃也更有依據。
中文關鍵字	固定污染源;許可;空污費

中文摘要

本項計畫為延續性之管制計畫，計畫執行主要分為三個部分：一、執行各類空氣污染物污染減量工作，包括硫氧化物、氮氧化物、粒狀污染物及揮發性有機物等；二、落實固定污染源許可管理工作；三、擴大經濟誘因策略，包括空污費收費、獎勵、及補助。以掌握本縣固定污染源污染特性及排放現況，並協助擬定固定污染源空氣污染管制策略及行動方案，進而維護本縣空氣品質。本計畫之執行期程自102/3/23至103/3/22止，共計12個月，各項作業執行進度皆依預定行程執行，執行內容包括：資料庫維護更新與管理、執行許可制度(包含審查作業及查核作業)、辦理空污費催補繳、審查及查核、執行排放量網路申報審核、工業區查核作業、辦理各類宣導說明會等工作項目。計畫執行期間固定源列管2,667家，列管製程數以機械設備製造修配業、紡織、印染業、化學製品製造業居多。在計畫期間針進行37家清查作業，查核結果同時回饋至固定源系統及環保署「排放量管理計畫」進而更新TEDS8.0版本資料，另統計計畫執行期間空氣污染物年排放量分別為：粒狀污染物2,189.415公噸/年，硫氧化物3,674.449公噸/年，氮氧化物6,139.259公噸/年，揮發性有機物5,873.361公噸/年。本年度重點工作為工業區查核管制作業，篩選觀音工業區及林口工三工業區進行現場清普查322家，現階段掌握觀音工業區總進駐廠家為344家，已清普查279家，掌握率為81.1%，林口工三工業區進駐家數為53家，已清普查43家，掌握率為81.13%，針對該部分也查獲8家新增列管之公私場所應納入空污費管制及申請操作許可證。其它具體工作成果包括：完成許可審查1,464個製程並核發961張許可證、完成220個製程許可查核作業、掌握1,401家空污費徵收對象並執行438件催補繳（17,357,567元）及574家次之空污費現場查核、完成101年第4季~102年第3季空污費審核、核收結算等工作，各項相關作業內容及詳細成果，均分述於本報告各章節中。建議計畫執行仍可就以下項目採取較精進之做法，包括：  加強生煤管制，提升後續資料分析之效率，建議建立生煤資料整合系統，將空污費、排放量、操作許可資料、定檢資料等進行整合，提供更快速、方便、確實及合理的資訊，作為策略擬定之參考。  針對空污費收費方式及排放量申報基準，建議環保署應盡快整合排放量申報系統，而讓空氣污染物排放量確認，除空污費收費更為精準，其他污染管制規劃也更有依據。

中文關鍵字

固定污染源;許可;空污費

類型	檔名	檔案大小	說明	最新版公開日期
期末報告	102桃園固定期末報告公開版.rar	0MB		2016/1/1 上午 12:00:00

摘要	This project is a continuous regulatory or control plan that was executed in the following 3 main stages: The first stage involved performing various tasks related to reducing air pollutants, including sulfur oxides, nitrogen oxides, particulate pollutants or matter, and volatile organic compounds. The second stage involved implementing management and permit tasks related to stationary pollution sources. Finally, the third stage involved expanding the economic incentive strategy to include air pollution fee collection, rewards, and subsidies. The above stages were performed to enhance current understandings of the pollution characteristics and emissions situation of stationary pollution sources in the county and assist in the formulation of air pollution regulatory strategies and action plans for stationary pollution sources, thereby improving and protecting the county’s air quality. This plan was executed over 12 months from March 23, 2013, to March 22, 2014. The various relevant operations were executed according to a predetermined schedule. The executed operations included database maintenance, updating, and management; permit system functions (including review and checking or auditing); pursuing, reviewing, and auditing outstanding air pollution fees; auditing and reviewing online emission declarations; auditing industrial parks; and organizing various promotional information sessions. During the plan execution period, 2,667 stationary pollution sources were listed and regulated. The majority of the regulated manufacturing processes were performed by the mechanical equipment manufacturing and repair, textile, print and dye, and chemical products manufacturing industries. Additionally, 37 businesses were inspected. The inspection results were inputted into the stationary pollution source system and communicated to the Environmental Protection Administration’s Emissions Volume Management Project, after which the information in the TEDS version 8.0 was updated. Furthermore, statistics of the annual air pollutant emissions volume during the project execution period were as follows: particulate pollutants or matter: 2,189.415 metric tons per annum; sulfur oxides: 3,674.449 metric tons per annum; nitrogen oxides: 6,139.259 metric tons per annum; and volatile organic compounds: 5,873.361 metric tons per annum. The key tasks for this year were to inspect and regulate industrial parks. Thus, 322 businesses in the Guanyin Industrial Park and Linkou Industrial Park were selected for on-site inspections. Currently, of 344 businesses in the Guanyin Industrial Park, 279 have been inspected, for a coverage rate of 81.1%. Of the 53 businesses in the Linkou Industrial Park, 43 have been inspected, for a coverage rate of 81.13%. Considering these particular sites, we recommend that the 8 public and private areas recently added to regulated sites should be included in air pollution fee regulations and required to apply for operation permits. Other specific achievements include the completion of 1,464 permit-related manufacturing process inspections, the issuing of 961 permits, the performance of 220 manufacturing process permit audits, the identification of 1,401 businesses liable for air pollution fee collection, the successful pursuit of 438 cases of outstanding fees (totaling NT$17,357,567), the execution of on-site air pollution fee audits at 567 businesses, the completion of an air pollution fee review for the fourth quarter of 2012 to the third quarter of 2013, and relevant verification, acceptance, and settlement. The content and results of various operations are detailed in the sections of this report. We recommend that more progressive methods, as listed below, be adopted for plan execution. • Enhance bituminous coal regulations and increase the efficiency of follow-up data analysis. We suggest developing an integrated system for information related to bituminous coal, such as air pollution fees, emission volumes, operational permit data, and regular inspection information, to provide faster, more convenient, accurate, and logical information as a basis for establishing policies. • Regarding the collection of air pollution fees and the benchmarks for emission volume declarations, we recommend that the Environmental Protection Administration integrate emission volume calculation methods as soon as possible. Besides increasing the precision of air pollution fees, the verification of air pollutant emission volumes can provide a basis for the planning of other pollution regulations.
英文關鍵字	stationary pollution sources;permit;air pollution fee

摘要

This project is a continuous regulatory or control plan that was executed in the following 3 main stages: The first stage involved performing various tasks related to reducing air pollutants, including sulfur oxides, nitrogen oxides, particulate pollutants or matter, and volatile organic compounds. The second stage involved implementing management and permit tasks related to stationary pollution sources. Finally, the third stage involved expanding the economic incentive strategy to include air pollution fee collection, rewards, and subsidies. The above stages were performed to enhance current understandings of the pollution characteristics and emissions situation of stationary pollution sources in the county and assist in the formulation of air pollution regulatory strategies and action plans for stationary pollution sources, thereby improving and protecting the county’s air quality. This plan was executed over 12 months from March 23, 2013, to March 22, 2014. The various relevant operations were executed according to a predetermined schedule. The executed operations included database maintenance, updating, and management; permit system functions (including review and checking or auditing); pursuing, reviewing, and auditing outstanding air pollution fees; auditing and reviewing online emission declarations; auditing industrial parks; and organizing various promotional information sessions. During the plan execution period, 2,667 stationary pollution sources were listed and regulated. The majority of the regulated manufacturing processes were performed by the mechanical equipment manufacturing and repair, textile, print and dye, and chemical products manufacturing industries. Additionally, 37 businesses were inspected. The inspection results were inputted into the stationary pollution source system and communicated to the Environmental Protection Administration’s Emissions Volume Management Project, after which the information in the TEDS version 8.0 was updated. Furthermore, statistics of the annual air pollutant emissions volume during the project execution period were as follows: particulate pollutants or matter: 2,189.415 metric tons per annum; sulfur oxides: 3,674.449 metric tons per annum; nitrogen oxides: 6,139.259 metric tons per annum; and volatile organic compounds: 5,873.361 metric tons per annum. The key tasks for this year were to inspect and regulate industrial parks. Thus, 322 businesses in the Guanyin Industrial Park and Linkou Industrial Park were selected for on-site inspections. Currently, of 344 businesses in the Guanyin Industrial Park, 279 have been inspected, for a coverage rate of 81.1%. Of the 53 businesses in the Linkou Industrial Park, 43 have been inspected, for a coverage rate of 81.13%. Considering these particular sites, we recommend that the 8 public and private areas recently added to regulated sites should be included in air pollution fee regulations and required to apply for operation permits. Other specific achievements include the completion of 1,464 permit-related manufacturing process inspections, the issuing of 961 permits, the performance of 220 manufacturing process permit audits, the identification of 1,401 businesses liable for air pollution fee collection, the successful pursuit of 438 cases of outstanding fees (totaling NT$17,357,567), the execution of on-site air pollution fee audits at 567 businesses, the completion of an air pollution fee review for the fourth quarter of 2012 to the third quarter of 2013, and relevant verification, acceptance, and settlement. The content and results of various operations are detailed in the sections of this report. We recommend that more progressive methods, as listed below, be adopted for plan execution. • Enhance bituminous coal regulations and increase the efficiency of follow-up data analysis. We suggest developing an integrated system for information related to bituminous coal, such as air pollution fees, emission volumes, operational permit data, and regular inspection information, to provide faster, more convenient, accurate, and logical information as a basis for establishing policies. • Regarding the collection of air pollution fees and the benchmarks for emission volume declarations, we recommend that the Environmental Protection Administration integrate emission volume calculation methods as soon as possible. Besides increasing the precision of air pollution fees, the verification of air pollutant emission volumes can provide a basis for the planning of other pollution regulations.

英文關鍵字

stationary pollution sources;permit;air pollution fee